Metadata: Identification_Information: Citation: Citation_Information: Originator: Loveland, A.M. Publication_Date: 2010 Title: Results of mercury-injection capillary pressure tests on outcrop samples in the Tyonek area of Cook Inlet Geospatial_Data_Presentation_Form: tabular digital data Series_Information: Series_Name: Raw Data File Issue_Identification: RDF 2010-1 Publication_Information: Publication_Place: Fairbanks, Alaska Publisher: Alaska Division of Geological & Geophysical Surveys Online_Linkage: http://dx.doi.org/10.14509/20481 Description: Abstract: This data set conveys information about samples collected during fieldwork in the Tyonek area of Cook Inlet. Samples were collected from outcrops for Mercury Injection Capillary Pressure (MICP) analyses. Purpose: This data set was created to provide sample collection location as well as summarize descriptions of the samples, such as the formation from which they were collected, and a brief physical description of the sample. Supplemental_Information: The data are available in tabular format as comma delimited ASCII files organized into four entities as described in this metadata file under the "Entity_and_Attribute_Information" section. The tables are as follows: >sample locations Summarizes sample name, formation from which the samples were collected, coordinates of sample location, and brief description of MICP samples (Table_1) >properties Summarizes pore system and capillary properties for MICP analyses (Table_2 and Table_17) >height data Summarizes height data for MICP analyses (Table_3, Table_11, and Table_18) >MICP raw data Summarizes raw data for MICP samples (Table_4 through Table_10, Table_12 through Table_16, and Table_18 through Table_25) Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2010 Currentness_Reference: publication date Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -151.93033 East_Bounding_Coordinate: -150.90815 North_Bounding_Coordinate: 61.35918 South_Bounding_Coordinate: 61.15849 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: geoscientificInformation Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: Mercury Theme_Keyword: Mercury Injection Capillary Pressure Analysis Theme_Keyword: Outcrop Samples Place: Place_Keyword_Thesaurus: None Place_Keyword: Cook Inlet Place_Keyword: Tyonek Stratum: Stratum_Keyword_Thesaurus: None Stratum_Keyword: Beluga Formation Stratum_Keyword: Tyonek Formation Stratum_Keyword: West Foreland Formation Access_Constraints: This report, map, and/or data set are available directly from the State of Alaska, Department of Natural Resources, Division of Geological & Geophysical Surveys (see contact information below). Use_Constraints: Any hardcopies or published data sets utilizing these data sets shall clearly indicate their source. If the user has modified the data in any way, the user is obligated to describe the types of modifications the user has made. User specifically agrees not to misrepresent these data sets, nor to imply that changes made by the user were approved by the State of Alaska, Department of Natural Resources, Division of Geological & Geophysical Surveys. Data_Set_Credit: Funding for this work was provided by Benchmark Oil and Gas, Pioneer Natural Resources, Chevron North American Exploration and Production Company, and the State of Alaska. Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The latitude and longitude values in this report were collected with handheld GPS units which are accurate to approximately 4 meters. Formation names were interpreted on the basis of prior geologic mapping. To facilitate accurate analysis care was taken to collect fresh, unweathered, fracture-free samples that appeared to be representative of low-permeability lithologies cropping out within the field area. PetroTech Associates did not provide documentation of per/sample or general procedural error ranges, however, more information regarding their analytical procedures can be found in the process steps section (below). Logical_Consistency_Report: No topologic relationships are present in this data set. Completeness_Report: This dataset includes all samples submitted for MICP analysis. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: The horizontal position accuracy on point data is approximately 4 meters based on the error range in the handheld GPS units used to collect spatial information. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: Adkison, W.L. Originator: Kelley, J.S. Originator: Newman, K.R. Publication_Date: 1975 Title: Lithology and palynology of Tertiary rocks exposed near Capps Glacier and along the Chuitna River, Tyonek Quadrangle, southern Alaska Geospatial_Data_Presentation_Form: document Series_Information: Series_Name: U.S. Geological Survey Open-file Report Issue_Identification: OFR 75-21 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1975 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Adkison and others (1975) Source_Contribution: Geologic formation identification in the Tyonek area Source_Information: Source_Citation: Citation_Information: Originator: Barnes, F.F. Publication_Date: 1966 Title: Geology and coal resources of the Beluga-Yentna region Alaska Geospatial_Data_Presentation_Form: document Series_Information: Series_Name: U.S. Geological Survey Bulletin Issue_Identification: B 1202-C Other_Citation_Details: 54 p., 7 plates Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1966 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Barnes (1966) Source_Contribution: Geologic formation identification in the Tyonek area Source_Information: Source_Citation: Citation_Information: Originator: Calderwood, K.W. Originator: Fackler, W.C. Publication_Date: 1972 Title: Proposed stratigraphic nomenclature for Kenai Group, Cook Inlet basin, Alaska Geospatial_Data_Presentation_Form: journal article Series_Information: Series_Name: AAPG Bulletin Issue_Identification: v. 56 Other_Citation_Details: p. 739-754. Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1972 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Calderwood and Fackler (1972) Source_Contribution: Geologic formation identification in the Tyonek area Source_Information: Source_Citation: Citation_Information: Originator: Flores, R.M. Originator: Stricker, G.D. Originator: Roberts, S.B. Publication_Date: 1994 Title: Miocene coal-bearing strata of the Tyonek Formation Geospatial_Data_Presentation_Form: document Other_Citation_Details: p. 95-114. Larger_Work_Citation: Citation_Information: Originator: Till, A.B. Originator: Moore, T.E. Publication_Date: 1994 Title: Geologic Studies in Alaska by the U.S. Geological Survey Geospatial_Data_Presentation_Form: document Series_Information: Series_Name: U.S. Geological Survey Bulletin Issue_Identification: B 2107 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1994 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Flores and others (1994) Source_Contribution: Geologic formation identification in the Tyonek area Source_Information: Source_Citation: Citation_Information: Originator: Flores, R.M. Originator: Stricker, G.D. Originator: Stiles, R.B. Publication_Date: 1997 Title: Tidal influence on deposition and quality of coals in the Miocene Tyonek Formation, Beluga Coal Field, upper Cook Inlet, Alaska Geospatial_Data_Presentation_Form: document Other_Citation_Details: p. 137-156 Larger_Work_Citation: Citation_Information: Originator: Dumoulin, J.A. Originator: Gray, J.E. Publication_Date: 1997 Title: Geologic Studies in Alaska by the U.S. Geological Survey, 1995 Geospatial_Data_Presentation_Form: document Series_Information: Series_Name: U.S. Geological Survey Professional Paper Issue_Identification: P 1574 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1997 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Flores and others (1997) Source_Contribution: Geologic formation identification in the Tyonek area Source_Information: Source_Citation: Citation_Information: Originator: Magoon, L.B. Originator: Adkison, W.L. Originator: Egbert, R.M. Publication_Date: 1976 Title: Map showing geology, wildcat wells, Tertiary plant fossil localities, K-Ar age dates, and petroleum operations, Cook Inlet, Alaska Geospatial_Data_Presentation_Form: map Series_Information: Series_Name: U.S. Geological Survey Miscellaneous Investigations Map Issue_Identification: I 1019 Other_Citation_Details: 3 sheets Source_Scale_Denominator: 250000 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1976 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Magoon and others (1976) Source_Contribution: Geologic formation identification in the Tyonek area Source_Information: Source_Citation: Citation_Information: Originator: Varva, C.L. Originator: Kaldi, J.G. Originator: Sneider, R.M. Publication_Date: 1992 Title: Geological applications of capillary pressure: a review Geospatial_Data_Presentation_Form: document Series_Information: Series_Name: American Association of Petroleum Geologists Bulletin Issue_Identification: June 1992, Vol. 76, Issue 6 Other_Citation_Details: p. 840-850 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1992 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Varva and others (1992) Source_Contribution: Summarizes the geological application of MICP Source_Information: Source_Citation: Citation_Information: Originator: Swanson, B.F. Publication_Date: 1981 Title: A simple correlation between permeabilities and mercury capillary pressures Geospatial_Data_Presentation_Form: journal article Series_Information: Series_Name: Journal of Petroleum Technology Issue_Identification: Vol. 33, Issue 12 Other_Citation_Details: p. 2498-2504 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1981 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Swanson (1981) Source_Contribution: Permeability calculation Process_Step: Process_Description: Outcrop samples were collected from six measured sections within the Beluga, Tyonek, and West Foreland Formations near Tyonek, Alaska. Outcrop locations and geologic formations were selected and interpreted based on preexisting geologic mapping. Source_Used_Citation_Abbreviation: Adkison and others (1975) Source_Used_Citation_Abbreviation: Barnes(1966) Source_Used_Citation_Abbreviation: Calderwood and Fackler (1972) Source_Used_Citation_Abbreviation: Flores and others (1994) Source_Used_Citation_Abbreviation: Flores and others (1997) Source_Used_Citation_Abbreviation: Magoon and others (1976) Process_Date: 2009 Process_Step: Process_Description: Analyses were performed by PetroTech Associates, Houston, Texas. Pieces of rock in each sample were examined using a reflected light microscope (magnifications of 5X to 50X) and a brief description of the rock properties was made (see below). A representative portion of the bulk sample was selected for capillary pressure analysis and trimmed to a size that would fit the sample holder. The sample was then placed in a low temperature convection oven and dried to a constant weight. The high-pressure, mercury injection capillary pressure (MICP) analysis was carried out using a Micromeritics 9420 mercury porosimeter. Penetrometers with 15 cc sample chambers were used for all analyses. Each test utilized a pressure table containing 118 separate pressure points from 1.5 to 59,500 psia, and the volume of mercury injected was measured at each point. The collected data were corrected for closure; that is, intrusion related only to the mercury conforming to the sample surface. Porosity and permeability values were generated for each of the samples using the MICP data. The porosity was measured using an Archimedes bulk volume and the pore volume based on the closure corrected volume of mercury injected. Permeability was calculated using the Swanson Equation (Swanson, 1981). Source_Used_Citation_Abbreviation: Swanson (1981) Source_Used_Citation_Abbreviation: Varva and others (1992) Process_Date: 2009 Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Point Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.00001 Longitude_Resolution: 0.00001 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1927 Ellipsoid_Name: Clarke 1866 Semi-major_Axis: 6378137 Denominator_of_Flattening_Ratio: 298.25722210088 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Attribute_Layer_Name: sample locations Entity_Type_Label: Table_1.csv Entity_Type_Definition: Table 1 is a summary of samples collected in the Homer area of Cook Inlet for Mercury Injection Capillary Pressure analysis. Information includes sample name, the formation from which the samples were collected, coordinates of sample collection, and a brief sample description. Entity_Type_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute: Attribute_Label: Sample Attribute_Definition: "Sample" refers to the name of the sample given by the geologist. Naming convention is based on the two-digit year, the two- or three-letter collector initials, and the measured section station number followed by a dash and a number representing the meter in the measured section at which the sample was collected. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Unrepresentable_Domain: These attributes are names assigned by the geologist and are unrepresentable. Attribute: Attribute_Label: Formation Attribute_Definition: Refers to the geologic unit from which a sample was collected. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: West Foreland Formation Enumerated_Domain_Value_Definition: Tertiary sedimentary unit Enumerated_Domain_Value_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Tyonek Formation Enumerated_Domain_Value_Definition: Tertiary sedimentary unit Enumerated_Domain_Value_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute: Attribute_Label: Latitude Attribute_Definition: Refers to a position on earth with respect to the equator Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 61.15849 Range_Domain_Maximum: 61.35978 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Longitude Attribute_Definition: Refers to a position on earth with respect to the prime meridian Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -150.90815 Range_Domain_Maximum: -151.93033 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Sample Description Attribute_Definition: A brief description of sample lithology and other significant characteristics Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Unrepresentable_Domain: Sample descriptions are documented in the field and are sample-specific, therefore unrepresentable Detailed_Description: Entity_Type: Entity_Attribute_Layer_Name: properties Entity_Type_Label: properties Entity_Type_Definition: Tables summarizing of pore system and capillary properties for Mercury Injection Capillary Pressure analyses performed on samples from the Tyonek area. Composed of Table_2.csv and Table_17.csv. Entity_Type_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute: Attribute_Label: Sample Depth (ft.) Attribute_Definition: This describes the sample name and meterage at which the sample was collected within a measured section. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Unrepresentable_Domain: These attributes are names assigned by the geologist and are unrepresentable. Attribute: Attribute_Label: Porosity (%) Attribute_Definition: This attribute refers to the porosity of the sample. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 17.8 Range_Domain_Maximum: 33.1 Attribute_Units_of_Measure: percent Attribute: Attribute_Label: Kair (md) Attribute_Definition: Refers to the Klinkenberg porosity of the sample. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0052 Range_Domain_Maximum: 0.791 Attribute_Units_of_Measure: millidarcies Attribute: Attribute_Label: Median Aperture Attribute_Definition: Refers to the median aperture of the sample. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0246 Range_Domain_Maximum: 0.2928 Attribute: Attribute_Label: Entry Attribute_Definition: Refers to the capillary pressure at mercury saturations of "entry" Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 229 Range_Domain_Maximum: 3390 Attribute: Attribute_Label: 5% Attribute_Definition: Refers to the capillary pressure at mercury saturation of 5%. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 320 Range_Domain_Maximum: 4738 Attribute: Attribute_Label: 7.5% Attribute_Definition: Refers to the capillary pressure at mercury saturation of 7.5%. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 333 Range_Domain_Maximum: 5024 Attribute: Attribute_Label: 10% Attribute_Definition: Refers to the capillary pressure at mercury saturation of 10%. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 342 Range_Domain_Maximum: 5279 Detailed_Description: Entity_Type: Entity_Attribute_Layer_Name: height data Entity_Type_Label: height data Entity_Type_Definition: Tables summarizing height data for Mercury Injection Capillary Pressure analyses. Composed of Table_3.csv, Table_11.csv and Table_18.csv Entity_Type_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute: Attribute_Label: Capillary pressure (psia) 0% Attribute_Definition: Refers to the capillary pressure at 0% Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 223 Range_Domain_Maximum: 3390 Attribute: Attribute_Label: Capillary pressure (psia) 5% Attribute_Definition: Refers to capillary pressure at 5%. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 320 Range_Domain_Maximum: 4738 Attribute: Attribute_Label: Capillary pressure (psia) 7.5% Attribute_Definition: Refers to the capillary pressure at 7.5%. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 333 Range_Domain_Maximum: 5024 Attribute: Attribute_Label: Capillary pressure (psia) 10% Attribute_Definition: Refers to the capillary pressure at 10%. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 342 Range_Domain_Maximum: 5279 Attribute: Attribute_Label: Height in feet 0% (gas) Attribute_Definition: Refers to the height in feet at 0% (gas) Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 98 Range_Domain_Maximum: 1446 Attribute: Attribute_Label: Height in feet 5% (gas) Attribute_Definition: Refers to the height in feet at 5% (gas) Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 137 Range_Domain_Maximum: 2022 Attribute: Attribute_Label: Height in feet 10% (gas) Attribute_Definition: Refers to the height at 10% (gas) Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 146 Range_Domain_Maximum: 2252 Attribute: Attribute_Label: Height in feet 7.5% (gas) Attribute_Definition: Refers to the height at 7.5% (gas) Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 142 Range_Domain_Maximum: 2144 Attribute: Attribute_Label: Height in feet 0% (oil) Attribute_Definition: Refers to the height at 0% (oil) Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 132 Range_Domain_Maximum: 1959 Attribute: Attribute_Label: Height in feet 5% (oil) Attribute_Definition: Refers to the height in feet at 5% (oil) Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 185 Range_Domain_Maximum: 2739 Attribute: Attribute_Label: Height in feet 7.5% (oil) Attribute_Definition: Refers to the height at 7.5% (oil) Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 192 Range_Domain_Maximum: 2904 Attribute: Attribute_Label: Height in feet 10% (oil) Attribute_Definition: Refers to the height at 10% (oil) Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 198 Range_Domain_Maximum: 3051 Detailed_Description: Entity_Type: Entity_Attribute_Layer_Name: MICP raw data Entity_Type_Label: MICP raw data Entity_Type_Definition: Summarizes the raw data for Mercury Injection Capillary Pressure samples. Composed of Table_4.csv, Table_5.csv, Table_6.csv, Table_7.csv, Table_8.csv, Table_9.csv, Table_10.csv, Table_12.csv, Table_13.csv, Table_14.csv, Table_15.csv, Table_16.csv, Table_18.csv, Table_19.csv, Table_20.csv, Table_21.csv, Table_22.csv, Table_23.csv, Table_24.csv and Table_25.csv Entity_Type_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute: Attribute_Label: Capillary Pressure (psia) Attribute_Definition: Refers to the capillary pressure measured in units of absolute pressure per square inch. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.64 Range_Domain_Maximum: 59500 Attribute_Units_of_Measure: psia Attribute: Attribute_Label: Pore Aperture Diameter (microns) Attribute_Definition: Refers to the diameter of the pore aperture measured in units of microns. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0036 Range_Domain_Maximum: 130 Attribute_Units_of_Measure: microns Attribute: Attribute_Label: Cumulative Bulk Vol. (%) Attribute_Definition: Refers to the cumulative bulk volume measured as a percentage. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00 Range_Domain_Maximum: 19.98 Attribute_Units_of_Measure: percent Attribute: Attribute_Label: Wetting Phase Saturation (%) Attribute_Definition: Refers to the percent of saturation in the wetting phase of mercury injection capillary pressure analysis. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percent Attribute: Attribute_Label: Incremental Wetting Phase Change (%) Attribute_Definition: Refers to the incremental wetting phase change in percent. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00 Range_Domain_Maximum: 9.77 Attribute_Units_of_Measure: percent Attribute: Attribute_Label: Saturation Change per psia Attribute_Definition: Refers to the saturation change in relation to the capillary pressure. Attribute_Definition_Source: Alaska Division of Geological & Geophysical Surveys Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.0178 Attribute_Units_of_Measure: percent Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: State of Alaska, Department of Natural Resources, Division of Geological & Geophysical Surveys Contact_Person: Energy Section Geologist Contact_Address: Address_Type: mailing and physical Address: 3354 College Road City: Fairbanks State_or_Province: Alaska Postal_Code: 99709-3707 Country: USA Contact_Voice_Telephone: (907) 451-5020 Contact_TDD/TTY_Telephone: None available. Contact_Facsimile_Telephone: 907-451-5050 Contact_Electronic_Mail_Address: dggspubs@alaska.gov Hours_of_Service: 8 am to 4:30 pm, Monday through Friday, except State holidays Contact_Instructions: Please view our web site (http://www.dggs.alaska.gov) for the latest information on available data. Please contact us using the e-mail address provided above when possible. Distribution_Liability: The State of Alaska makes no express or implied warranties (including warranties of merchantability and fitness) with respect to the character, function, or capabilities of the electronic services or products or their appropriateness for any user's purposes. In no event will the State of Alaska be liable for any incidental, indirect, special, consequential, or other damages suffered by the user or any other person or entity whether from the use of the electronic services or products, any failure thereof, or otherwise, and in no event will the State of Alaska's liability to the requester or anyone else exceed the fee paid for the electronic service or product. Standard_Order_Process: Non-digital_Form: Current publication is available on paper. To purchase this or other printed reports and maps, contact DGGS by phone (907-451-5020), e-mail (dggspubs@alaska.gov), or fax (907-451-5050). Payment accepted: Cash, check, money order, VISA, or MasterCard. Fees: contact DGGS by phone for current fees Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: CSV File_Decompression_Technique: No compression applied Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://dx.doi.org/10.14509/20481 Fees: No fees charged for downloaded files Metadata_Reference_Information: Metadata_Date: 20100106 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Energy Section Geologist Contact_Organization: Alaska Division of Geological & Geophysical Surveys Contact_Address: Address_Type: mailing and physical Address: 3354 College Road City: Fairbanks State_or_Province: Alaska Postal_Code: 99709-3797 Country: USA Contact_Voice_Telephone: (907)451-5020 Metadata_Standard_Name: FGDC Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Access_Constraints: none Metadata_Use_Constraints: If the user has modified the data in any way they are obligated to describe the types of modifications they have performed in the supporting metadata file. User specifically agrees not to imply that changes they made were approved by the State of Alaska, Department of Natural Resources, Division of Geological & Geophysical Surveys.