Identification_Information: Citation: Citation_Information: Originator: Suleimani, E.N. Originator: Salisbury, J.B. Originator: Nicolsky, D.J. Publication_Date: 2023 Title: Tsunami inundation maps of Anchorage and upper Cook Inlet, Alaska Geospatial_Data_Presentation_Form: report, data Series_Information: Series_Name: Report of Investigation Issue_Identification: RI 2023-2 Publication_Information: Publication_Place: Fairbanks, Alaska, United States Publisher: Alaska Division of Geological & Geophysical Surveys Other_Citation_Details: 56 p., 9 sheets Online_Linkage: https://doi.org/10.14509/31018 Description: Abstract: Tsunami inundation maps of Anchorage and upper Cook Inlet, Alaska, Report of Investigation 2023-2, evaluates potential tsunami hazards for upper Cook Inlet, including Anchorage, Girdwood, and Hope, Alaska, by numerically modeling the extent of inundation from tsunami waves generated by hypothetical earthquakes. We define an updated suite of earthquakes, including Tohoku-style megathrust ruptures and other sources in the eastern part of the Alaska-Aleutian megathrust, to calculate vertical seafloor displacements and model resulting tsunami dynamics. We also perform a numerical analysis of tsunami-tide interactions for the 1964 Great Alaska Earthquake in upper Cook Inlet, an area with some of the most extreme tidal ranges in the U.S. This analysis reveals why the 1964 earthquake-generated tsunami largely went undetected in upper Cook Inlet and highlights that the tidal stage at the time of future great earthquakes determines the severity of tsunami impacts around Anchorage. A rare combination of earthquake magnitude, location, and timing must be satisfied for tsunami wave energy to reach upper Cook Inlet coincident with a natural high tide. A hypothetical earthquake with maximum slip distributed between depths of 17 and 32 km (10.6 and 19.9 mi) results in worst case tsunami inundation for Anchorage. If the tsunami arrives to the Anchorage area at high tide, the maximum predicted overland flow depths in the community can reach up to 10 m (32.8 ft), and the currents could be as strong as 4 m/sec (7.8 knots). Dangerous wave activity is expected to last for more than 24 hours. The results presented here are intended to provide guidance to local emergency management agencies for tsunami inundation assessment, evacuation planning, and public education to mitigate future tsunami damage. The complete report and digital data are available from the DGGS website: http://doi.org/10.14509/31018. Purpose: DGGS manages the DNR portion of the federally funded National Tsunami Hazard Mitigation Program (NTHMP). The program identifies at-risk coastal Alaska communities and provides tsunami hazard maps for hazard mitigation and emergency response training. Supplemental_Information: >max-flow-depth: Raster image depicting maximum composite flow depths over dry land. For each grid point, the pixel value provides the modeled depth of water (in meters) over previously dry land, representing the maximum depth value of all calculated tsunami scenarios. >max-inundation: Estimated, maximum credible scenario inundation line(s) that encompasses the maximum extent of flooding based on model simulation of all credible source scenarios and historical observations. The maximum credible scenario inundation lines are intended to be utilized as a basis for local tsunami hazard planning and development of evacuation maps. >scenario-01: Mw 9.2 earthquake in the KI-KP region: Predominantly shallow slip with maximum slip at a depth of 10-15 km (6.2-9.3 mi) >scenario-02: Mw 9.2 earthquake in the KI-KP region: Predominantly shallow slip with maximum slip at a depth of 0-10 km (0-6.2 mi) >scenario-03: Mw 8.7 earthquake in the KP region: maximum slip at a depth of 35-45 km (21.7-27.9 mi) >scenario-04: Mw 8.8 earthquake in the KP region: maximum slip at a depth of 28-42 km (17.4-26.0 mi) >scenario-05: Mw 8.8 earthquake in the KP region: maximum slip at a depth of 5-7 km (3.1-4.3 mi) >scenario-06: Mw 9.0 earthquake in the PWS-KP-KI region: maximum slip at a depth of 28-42 km (17.4-26.0 mi) >scenario-07: Mw 9.1 earthquake in the PWS-KP-KI region: maximum slip at a depth of 25-35 km (15.5-21.7 mi) >scenario-08: Mw 9.1 earthquake in the PWS-KP-KI region: maximum slip at a depth of 18-32 km (11.2-19.9 mi) >scenario-09: Mw 9.2 earthquake in the PWS-KP-KI region: maximum slip at a depth of 17-32 km (10.6-19.9 mi) >scenario-10: Mw 9.1 earthquake in the PWS-KP-KI region: maximum slip at a depth of 20-40 km (12.4-24.8 mi) >scenario-11: Mw 9.3 earthquake with 50 m (164 ft) of maximum slip close to the trench >scenario-12: Mw 9.3 earthquake with 35 m (114.8 ft) of maximum slip in most of the rupture >scenario-13: Mw 9.0 earthquake offshore AP region: SAFRR scenario >scenario-14: Mw 8.9 earthquake in the KI-AP region: maximum slip at a depth of 15-25 km (9.3-15.5 mi) >scenario-15: Mw 8.8 earthquake in the KI-AP region: maximum slip at a depth of 25-35 km (15.5-21.7 mi) >scenario-16: Mw 9.1 rupture of the Cascadia subduction zone, including the entire megathrust between British Columbia and northern California Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2023 Currentness_Reference: publication date Status: Progress: complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -150.370758 East_Bounding_Coordinate: -148.887405 North_Bounding_Coordinate: 61.628145 South_Bounding_Coordinate: 60.757040 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: geoscientificInformation Theme: Theme_Keyword_Thesaurus: Alaska Division of Geological & Geophysical Surveys Theme_Keyword: Active Fault Theme_Keyword: Bathymetry Theme_Keyword: Coastal Theme_Keyword: Coastal and River Theme_Keyword: DGGS Theme_Keyword: Earthquake Theme_Keyword: Earthquake Related Slope Failure Theme_Keyword: Emergency Preparedness Theme_Keyword: Engineering Theme_Keyword: Engineering Geology Theme_Keyword: Environmental Theme_Keyword: Fault Displacement Theme_Keyword: Faulting Theme_Keyword: Faults Theme_Keyword: Flood Theme_Keyword: Geologic Theme_Keyword: Geologic Hazards Theme_Keyword: Geological Process Theme_Keyword: Geotechnical Theme_Keyword: Hazards Theme_Keyword: Inundation Theme_Keyword: Land Subsidence Theme_Keyword: Landslide Theme_Keyword: Landslide Susceptibility Theme_Keyword: Marine Theme_Keyword: Marine Geology Theme_Keyword: Modeling Theme_Keyword: Neotectonics Theme_Keyword: Seismic Hazards Theme_Keyword: Seismic Interpretation Theme_Keyword: Subduction Theme_Keyword: Subsidence Theme_Keyword: Subsurface Theme_Keyword: Surface Theme_Keyword: Topography Place: Place_Keyword_Thesaurus: Alaska Division of Geological & Geophysical Surveys Place_Keyword: Anchorage Place_Keyword: Cook Inlet Place_Keyword: Girdwood Place_Keyword: Hope Place_Keyword: Knik Place_Keyword: Turnagain Arm Access_Constraints: This report, map, and/or dataset is available directly from the State of Alaska, Department of Natural Resources, Division of Geological & Geophysical Surveys (see contact information below). Use_Constraints: This dataset includes results of numerical modeling of earthquake-generated tsunami waves for a specific community. Modeling was completed using the best information and tsunami modeling software available at the time of analysis. They are numerical solutions and, while they are believed to be accurate, their ultimate accuracy during an actual tsunami will depend on the specifics of earth deformations, on-land construction, tide level, and other parameters at the time of the tsunami. Actual areas of inundation may differ from areas shown in this dataset. Landslide tsunami sources may not be included in the modeling due to unknown potential impact of such events on a given community; please refer to accompanying report for more information on tsunami sources used for this study. The limits of inundation shown should only be used as a general guideline for emergency planning and response action in the event of a major tsunamigenic earthquake. These results are not intended for any other use, including land-use regulation or actuarial purposes. Any hard copies or published datasets utilizing these datasets shall clearly indicate their source. If the user has modified the data in any way, the user is obligated to describe the types of modifications the user has made. The user specifically agrees not to misrepresent these datasets, nor to imply that changes made by the user were approved by the State of Alaska, Department of Natural Resources, Division of Geological & Geophysical Surveys. The State of Alaska makes no express or implied warranties (including warranties for merchantability and fitness) with respect to the character, functions, or capabilities of the electronic data or products or their appropriateness for any user's purposes. In no event will the State of Alaska be liable for any incidental, indirect, special, consequential, or other damages suffered by the user or any other person or entity whether from the use of the electronic services or products or any failure thereof or otherwise. In no event will the State of Alaska's liability to the Requestor or anyone else exceed the fee paid for the electronic service or product. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Alaska Division of Geological & Geophysical Surveys Contact_Position: Metadata Manager Contact_Address: Address_Type: mailing and physical Address: 3354 College Road City: Fairbanks State_or_Province: AK Postal_Code: 99709-3707 Country: USA Contact_Voice_Telephone: (907)451-5020 Contact_Facsimile_Telephone: (907)451-5050 Contact_Electronic_Mail_Address: dggspubs@alaska.gov Hours_of_Service: 8 am to 4:30 pm, Monday through Friday, except State holidays Contact_Instructions: Please view our website (https://www.dggs.alaska.gov) for the latest information on available data. Please contact us using the e-mail address provided above when possible. Data_Set_Credit: This report was funded by the U.S. Department of Commerce/National Oceanic and Atmospheric Administration (NOAA) through National Tsunami Hazard Mitigation Program Awards NA21NWS4670003 and NA22NWS4670012 to the Alaska Division of Homeland Security and Emergency Management. This does not constitute an endorsement by NOAA. Numerical calculations for this work were supported by High Performance Computing resources at the Research Computing Systems unit at the Geophysical Institute of the University of Alaska Fairbanks. We thank our reviewers, Peter Haeussler and Rob Witter, for their insightful comments, suggestions, and discussions, which helped improve the report. Cross_Reference: Citation_Information: Originator: Newell, J.T. Originator: Maurits, S.A. Originator: Suleimani, E.N. Originator: Koehler, R.D. Originator: Nicolsky, D.J. Publication_Date: 2015 Title: Tsunami inundation maps for Alaska communities Series_Information: Series_Name: Digital Data Series Issue_Identification: DDS 10 Publication_Information: Publication_Place: Fairbanks, Alaska, United States Publisher: Alaska Division of Geological & Geophysical Surveys Online_Linkage: https://doi.org/10.14509/29523 Cross_Reference: Citation_Information: Originator: Salisbury, J.B. Originator: Janssen, K.A. Publication_Date: 2022 Title: Tsunamis in Alaska Series_Information: Series_Name: Information Circular Issue_Identification: IC 85 v. 2 Publication_Information: Publication_Place: Fairbanks, Alaska, United States Publisher: Alaska Division of Geological & Geophysical Surveys Other_Citation_Details: 2 p Online_Linkage: https://doi.org/10.14509/30849 Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The maps showing the results of our modeling have been completed using the best information available and are believed to be accurate, however, their preparation required many assumptions. We described several scenarios and provide an estimate of maximum credible tsunami inundation. Actual conditions during a tsunami event may vary from those considered, so the accuracy cannot be guaranteed. The limits of inundation shown should be used only as a guideline for emergency planning and response action. Actual areas inundated will depend on specifics of the earth deformations, on-land construction, and tide level, and they may differ from areas shown on the map. The information on this map is intended to provide a basis for state and local agencies to plan emergency evacuation and tsunami response actions in the event of a major tsunamigenic earthquake. These results are not intended for land-use regulation or building-code development. This DGGS Report of Investigations is a final report of scientific research. Several scientists familiar with the subject matter provided technical reviews. Uncertainties associated with the depiction or interpretation of various features are discussed in the manuscript. Logical_Consistency_Report: Not applicable Completeness_Report: Our modeling results have been completed using the best information available and are believed to be accurate; however, their preparation required many assumptions, and actual conditions during a tsunami event may vary from those considered. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: The hydrodynamic model used to calculate propagation and runup of tsunami waves is a nonlinear, flux-formulated, shallow-water model that has passed the validation and verification tests required for models used in the production of tsunami inundation maps. The uncertainties in tsunami modeling include bottom friction, the presence or absence of buildings and vegetation in DEMs, the time delay between the observed and computed tsunami arrivals discussed above, the lack of horizontal deformation in the displacement models, and the assumption of instantaneous displacement. The tsunami scenarios we calculate in this report are considered sufficient to capture the worst-case tsunami event. However, there are still an infinite number of possible slip distributions. Further details about the limitations of the employed modeling approach are described in earlier reports by Suleimani and others and Nicolsky and others, as well as in National Tsunami Hazard Mitigation Program guidelines. See the accompanying report for more detail. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: The vertical accuracy of the inundation modeling is dependent on the accuracy and resolution of the digital elevation models (DEMs) and tidal datum values that were used to compile the computational grid. We provide additional details about DEM and grid development in the accompanying report. Prior to scenario modeling, bathymetric data were shifted to use Mean Higher High Water (MHHW) as the vertical datum. The depths of inundation shown should be used only as a guideline for emergency planning and response action. Actual inundation water depth will depend on specifics of the earth deformations, on-land construction, and tide level, and they may differ from areas shown by this data. The information is intended to permit state and local agencies to plan emergency evacuation and tsunami response actions in the event of a major tsunamigenic earthquake. These results are not intended for land-use regulation or building-code development. For additional information, please reference the sources of errors and uncertainties section of the accompanying report. Lineage: Process_Step: Process_Description: Model validation - The numerical model that we used for simulation of tsunami wave propagation and runup was validated through a set of analytical benchmarks and tested against laboratory data. The model solves water equations using a finite-difference method on a staggered grid. See the accompanying report for more detail and additional model information. Process_Date: 2014 Process_Step: Process_Description: Development of nested grids - To support inundation modeling of coastal areas in Alaska, we used a series of nested telescoping grids, or digital elevation models (DEMs), as input layers for tsunami inundation modeling and mapping. These grids of increasing resolution allowed us to propagate waves generated by various sources to Anchorage, Girdwood, and Hope. In order to propagate a wave from its source to various coastal locations, we used embedded grids, placing a large, coarse grid in deep water and coupling it with smaller, finer grids in shallow water areas. The extent of each grid used for our tsunami inundation mapping is listed in the accompanying report. Process_Date: 2022 Process_Step: Process_Description: Numerical simulations of hypothetical tsunami scenarios - We assessed hazards related to tectonic tsunamis in Anchorage, Girdwood, and Hope by performing model simulations for each historic hypothetical source scenario. For each tsunami scenario, we first calculate the maximum tsunami wave heights in the highest-resolution grid over the course of the entire model run in the following way: at each grid point, the tsunami wave height is computed at every time step during the tsunami propagation time and the maximum value is kept. Then we compute the composite maximum tsunami wave height from all considered scenarios by again choosing the maximum value for each grid point among all scenarios, and plot the results. Process_Date: 2022 Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: vector Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: .000001 Longitude_Resolution: .000001 Geographic_Coordinate_Units: decimal degrees Geodetic_Model: Horizontal_Datum_Name: WGS84 Ellipsoid_Name: WGS 84 Semi-major_Axis: 6378137 Denominator_of_Flattening_Ratio: 298.257223563 Vertical_Coordinate_System_Definition: Depth_System_Definition: Depth_Datum_Name: Mean Higher High Water Depth_Resolution: .01 Depth_Distance_Units: meter Depth_Encoding_Method: Attribute values Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-upper-cook-inlet-max-flow-depth.tif Entity_Type_Definition: Raster image depicting maximum composite flow depths over dry land. For each grid point, the pixel value provides the modeled depth of water (in meters) over previously dry land, representing the maximum depth value of all calculated tsunami scenarios. Entity_Type_Definition_Source: Alaska Earthquake Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: max-flow-depth Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-upper-cook-inlet-max-inundation.shp Entity_Type_Definition: Estimated, maximum credible scenario inundation line(s) that encompasses the maximum extent of flooding based on model simulation of all credible source scenarios and historical observations. The maximum credible scenario inundation lines are intended to be utilized as a basis for local tsunami hazard planning and development of evacuation maps. Entity_Type_Definition_Source: Alaska Earthquake Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: max-inundation Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-01-upper-cook-inlet-inundation.shp, ri2023-2-scenario-01-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.2 earthquake in the KI-KP region: Predominantly shallow slip with maximum slip at a depth of 10-15 km (6.2-9.3 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-01 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-02-upper-cook-inlet-inundation.shp, ri2023-2-scenario-02-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.2 earthquake in the KI-KP region: Predominantly shallow slip with maximum slip at a depth of 0-10 km (0-6.2 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-02 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-03-upper-cook-inlet-inundation.shp, ri2023-2-scenario-03-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 8.7 earthquake in the KP region: maximum slip at a depth of 35-45 km (21.7-27.9 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-03 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-04-upper-cook-inlet-inundation.shp, ri2023-2-scenario-04-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 8.8 earthquake in the KP region: maximum slip at a depth of 28-42 km (17.4-26.0 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-04 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-05-upper-cook-inlet-inundation.shp, ri2023-2-scenario-05-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 8.8 earthquake in the KP region: maximum slip at a depth of 5-7 km (3.1-4.3 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-05 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-06-upper-cook-inlet-inundation.shp, ri2023-2-scenario-06-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.0 earthquake in the PWS-KP-KI region: maximum slip at a depth of 28-42 km (17.4-26.0 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-06 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-07-upper-cook-inlet-inundation.shp, ri2023-2-scenario-07-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.1 earthquake in the PWS-KP-KI region: maximum slip at a depth of 25-35 km (15.5-21.7 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-07 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-08-upper-cook-inlet-inundation.shp, ri2023-2-scenario-08-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.1 earthquake in the PWS-KP-KI region: maximum slip at a depth of 18-32 km (11.2-19.9 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-08 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-09-upper-cook-inlet-inundation.shp, ri2023-2-scenario-09-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.2 earthquake in the PWS-KP-KI region: maximum slip at a depth of 17-32 km (10.6-19.9 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-09 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-10-upper-cook-inlet-inundation.shp, ri2023-2-scenario-10-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.1 earthquake in the PWS-KP-KI region: maximum slip at a depth of 20-40 km (12.4-24.8 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-10 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-11-upper-cook-inlet-inundation.shp, ri2023-2-scenario-11-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.3 earthquake with 50 m (164 ft) of maximum slip close to the trench Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-11 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-10-upper-cook-inlet-inundation.shp, ri2023-2-scenario-12-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.3 earthquake with 35 m (114.8 ft) of maximum slip in most of the rupture Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-12 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-13-upper-cook-inlet-inundation.shp, ri2023-2-scenario-13-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.0 earthquake offshore AP region: SAFRR scenario Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-13 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-14-upper-cook-inlet-inundation.shp, ri2023-2-scenario-14-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 8.9 earthquake in the KI-AP region: maximum slip at a depth of 15-25 km (9.3-15.5 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-14 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-15-upper-cook-inlet-inundation.shp, ri2023-2-scenario-15-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 8.8 earthquake in the KI-AP region: maximum slip at a depth of 25-35 km (15.5-21.7 mi) Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-15 Detailed_Description: Entity_Type: Entity_Type_Label: ri2023-2-scenario-16-upper-cook-inlet-inundation.shp, ri2023-2-scenario-16-upper-cook-inlet-flow-depth.tif Entity_Type_Definition: Mw 9.1 rupture of the Cascadia subduction zone, including the entire megathrust between British Columbia and northern California Entity_Type_Definition_Source: Alaska Earthquake Information Center, Geophysical Institute, University of Alaska, this report Entity_Attribute_Layer_Name: scenario-16 Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: Alaska Division of Geological & Geophysical Surveys Contact_Position: Metadata Manager Contact_Address: Address_Type: mailing and physical Address: 3354 College Road City: Fairbanks State_or_Province: AK Postal_Code: 99709-3707 Country: USA Contact_Voice_Telephone: (907)451-5020 Contact_Facsimile_Telephone: (907)451-5050 Contact_Electronic_Mail_Address: dggspubs@alaska.gov Hours_of_Service: 8 am to 4:30 pm, Monday through Friday, except State holidays Contact_Instructions: Please view our website (https://www.dggs.alaska.gov) for the latest information on available data. Please contact us using the e-mail address provided above when possible. Resource_Description: RI 2023-2 Distribution_Liability: The State of Alaska makes no expressed or implied warranties (including warranties for merchantability and fitness) with respect to the character, functions, or capabilities of the electronic data or products or their appropriateness for any user's purposes. In no event will the State of Alaska be liable for any incidental, indirect, special, consequential, or other damages suffered by the user or any other person or entity whether from the use of the electronic services or products or any failure thereof or otherwise. In no event will the State of Alaska's liability to the Requestor or anyone else exceed the fee paid for the electronic service or product. Standard_Order_Process: Non-digital_Form: DGGS publications are available as free online downloads or you may purchase paper hard-copies or digital files on CD/DVD or other digital storage media by mail, phone, fax, or email from the DGGS Fairbanks office. To purchase this or other printed reports and maps, contact DGGS by phone (907-451-5020), e-mail (dggspubs@alaska.gov), or fax (907-451-5050). Payment accepted: Cash, check, money order, VISA, or MasterCard. Turnaround time is 1-2 weeks unless special arrangements are made and an express fee is paid. Shipping charge will be the actual cost of postage and will be added to the total amount due. Contact us for the exact shipping amount. Fees: Contact DGGS for current pricing Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: Shapefiles and Raster data Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://doi.org/10.14509/31018 Fees: Free download Metadata_Reference_Information: Metadata_Date: 20230814 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Alaska Division of Geological & Geophysical Surveys Contact_Person: Simone Montayne Contact_Position: Metadata Manager Contact_Address: Address_Type: mailing and physical Address: 3354 College Road City: Fairbanks State_or_Province: AK Postal_Code: 99709-3707 Country: USA Contact_Voice_Telephone: (907)451-5020 Contact_Facsimile_Telephone: (907)451-5050 Contact_Electronic_Mail_Address: dggspubs@alaska.gov Hours_of_Service: 8 am to 4:30 pm, Monday through Friday, except State holidays Metadata_Standard_Name: FGDC Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Use_Constraints: If the user has modified the data in any way they are obligated to describe the types of modifications they have performed in the supporting metadata file. User specifically agrees not to imply that changes they made were approved by the Alaska Department of Natural Resources or Division of Geological & Geophysical Surveys. Metadata_Extensions: Online_Linkage: https://dggs.alaska.gov/metadata/dggs.ext Profile_Name: dggs metadata extensions